PRODUCTSKITSGUIDESDELIVERYFIND_USENQUIRE ON WHATSAPP

12 Arduino Project Ideas for Diploma and Engineering Students

Projects7 min readUpdated 18 Nov 2026
Hands holding an Arduino Uno wired to a breadboard with a lit LED

A good Arduino project is small enough to finish and clear enough to explain in a viva. These twelve ideas use common parts and teach one new skill each. Each lists the parts you need, so you can make one shopping list.

Parts you will need for almost every project

  • Arduino Uno (or compatible) and a USB cable
  • Breadboard and male-to-male and male-to-female jumper wires
  • Assorted resistors: 220 ohm, 1 k and 10 k are used most often
  • LEDs and a push button or two

The 12 ideas at a glance

#ProjectLevel
1Traffic light controllerBeginner
2Ultrasonic distance meterBeginner
3Temperature and humidity displayBeginner
4Automatic night lampBeginner
5Obstacle avoiding carIntermediate
6Smart dustbinBeginner
7Bluetooth controlled car or lampIntermediate
8RFID door lock or attendanceIntermediate
9Soil moisture irrigationIntermediate
10Gas or smoke alarmBeginner
11Digital clock with RTCIntermediate
12Line follower robotIntermediate

Project details and parts

1. Traffic light controller

Three LEDs cycle red, yellow and green with timed delays. Add a push button for a pedestrian crossing.

Parts: Arduino Uno, red, yellow and green LEDs, 3 x 220 ohm resistors, push button, breadboard, jumper wires.

2. Ultrasonic distance meter

Measure distance with an HC-SR04 sensor and show it on an LCD.

Parts: Arduino Uno, HC-SR04 sensor, 16x2 I2C LCD, breadboard, jumper wires.

3. Temperature and humidity display

Read a DHT11 sensor and show both values on an LCD.

Parts: Arduino Uno, DHT11 sensor module, 16x2 I2C LCD, jumper wires.

4. Automatic night lamp

An LDR switches an LED lamp on in the dark.

Parts: Arduino Uno, LDR, 10 k ohm resistor, LED, 220 ohm resistor, breadboard.

5. Obstacle avoiding car

A small car that turns away when the ultrasonic sensor sees something ahead.

Parts: Arduino Uno, L298N motor driver, 2 DC geared motors with wheels, car chassis, HC-SR04, battery pack, jumper wires.

6. Smart dustbin

The lid opens by a servo when your hand comes near.

Parts: Arduino Uno, HC-SR04, SG90 servo motor, small bin or box, jumper wires.

7. Bluetooth controlled car or lamp

Control outputs from your phone over Bluetooth.

Parts: Arduino Uno, HC-05 Bluetooth module, L298N driver and motors (or LEDs), jumper wires, phone app.

8. RFID door lock or attendance

Scan a tag to unlock a servo latch or log a card ID.

Parts: Arduino Uno, RC522 RFID reader, RFID tags, servo motor, buzzer, jumper wires.

9. Soil moisture irrigation

A pump runs when the soil is dry.

Parts: Arduino Uno, soil moisture sensor, relay module, small DC water pump, tubing, separate power supply for the pump.

10. Gas or smoke alarm

A buzzer sounds when an MQ-series sensor crosses a threshold.

Parts: Arduino Uno, MQ-2 gas sensor module, buzzer, LED, jumper wires.

11. Digital clock with RTC

A clock that keeps time even when the Arduino is off.

Parts: Arduino Uno, DS3231 RTC module, 16x2 I2C LCD, jumper wires.

12. Line follower robot

A robot that follows a black line using IR sensors.

Parts: Arduino Uno, 2 IR sensor modules, L298N driver, 2 DC motors with wheels, chassis, battery pack.

How to choose and finish one

  1. Pick a project that uses at most two new parts.
  2. Build it on a breadboard first and make it work.
  3. Draw the circuit diagram and comment the code.
  4. Add one feature of your own, such as a display, an alarm or logging.
  5. Move it to a stripboard or PCB only after it works reliably.

Not sure how to read a resistor you picked? See our resistor colour code guide. Soldering to stripboard? Start with soldering basics.

Where to get the parts

Konark Radio Centre in Ashok Nagar, Bhubaneswar, supplies electronic components and has served students since 1995. Send your project parts list on WhatsApp or visit the shop. You can also look at our project kits.

Frequently asked questions

Which Arduino board should a beginner buy?

The Arduino Uno is the usual choice because most tutorials and libraries are written for it. A Nano is a smaller option if your project must fit in a tight space.

Can I use these ideas for a final year or diploma project?

Yes, but add something of your own, such as a second sensor, a display, data logging or a better enclosure. Evaluators look for what you changed and understood, not only a copied circuit.

Do I need to know programming first?

No. Start with the blink and button examples that come with the Arduino IDE. Basic C-style syntax is enough for the first few projects.

Is it safe to switch mains appliances with a relay?

It can be, but it involves mains voltage and is not a beginner task. Start with low-voltage loads such as LEDs and small motors, and get an experienced person to check any mains wiring.

Need the parts?

Send the parts list on WhatsApp or walk in. Plot No. 39/F, Ashok Nagar, near Sreeleathers, open 10 AM to 9 PM, all 7 days.