PRODUCTSKITSGUIDESDELIVERYFIND_USENQUIRE ON WHATSAPP

Line Follower Robot Kit

A two-wheel robot that follows a black line, a favourite college project.

Line Follower Robot Kit
Intermediate

Line follower robot kit for college projects: Arduino Nano, IR line sensors, L298N driver, BO motors, wheels and chassis. Ask the price on WhatsApp.

Price: ask on WhatsApp

Contents can be customised. Tell us your project on WhatsApp and we'll put the right parts together.

Same-day delivery in Bhubaneswar via Rapido is available. See delivery details.

What's in the kit

ComponentQty
Arduino Nano (ATmega328P)Arduino Uno can be used instead1
L298N dual motor driver module1
BO gear motors, 3 to 6 V, with wheels2
Castor (ball) wheel1
Robot chassis, acrylic two-wheel1
IR line sensor modules (TCRT5000 type)A 5-channel array is available on request3
Li-ion 18650 cells, 3.7 V2
2-cell 18650 battery holder with switch1
Jumper wires, female to female20
Mini breadboard, 400 points1
Screws, nuts and spacers set1 set

What you can build

  • Basic black-line follower on a white track
  • PID-tuned fast line follower
  • Obstacle-avoiding robot after adding an ultrasonic sensor
  • Maze-solving robot using more sensors
  • Bluetooth-controlled car with an HC-05 module

Who it's for

  • Engineering and diploma students
  • Robotics club members
  • Anyone preparing for a techfest event

Notes before you start

  • Two 18650 cells give about 7.4 V. The L298N drops around 2 V, so motors get roughly 5 V, which suits BO motors.
  • Charge 18650 cells with a proper Li-ion charger only. Do not short the battery terminals.
  • IR sensors are sensitive to room light. Adjust the on-board pot on each sensor module for your track.
  • Black electrical tape on a white sheet or flex banner makes a good practice track.

Questions

Is the Arduino code included?

We do not sell code, but line follower sketches are widely available online. We can point you to the sensor pin layout when you buy.

Can I add more sensors later?

Yes. The Nano has enough pins for five sensors. Tell us if you want a 5-channel array from the start.

Will it work for a competition?

This is a common beginner design for line follower events. Competition rules vary, so check yours and tell us if you need different motors or wheels.

Does the kit include a battery charger?

No. Ask on WhatsApp if you need a Li-ion charger added.

Want the price for this kit?

Message us on WhatsApp. You can also ask to change parts to suit your project.

Ask price on WhatsApp

Other kits