PRODUCTSKITSGUIDESDELIVERYFIND_USENQUIRE ON WHATSAPP

Breadboard Power Supply Kit

Fixed 5 V and a variable 1.25 to 12 V rail for your breadboard builds.

Breadboard Power Supply Kit
Intermediate

Breadboard power supply kit with 7805 and LM317 regulators, rectifier, capacitors and heatsinks. Fixed 5 V plus variable output. Ask the price on WhatsApp.

Price: ask on WhatsApp

Contents can be customised. Tell us your project on WhatsApp and we'll put the right parts together.

Same-day delivery in Bhubaneswar via Rapido is available. See delivery details.

What's in the kit

ComponentQty
7805 voltage regulator, TO-2201
LM317 adjustable regulator, TO-2201
Transformer 0-12 V, 500 mA to 1 AOr use a 12 V DC adapter instead1
1N4007 diodes (bridge rectifier)4
Electrolytic capacitor, 1000 uF, 25 V1
Electrolytic capacitor, 100 uF, 25 V2
Ceramic capacitors, 0.1 uF (104)3
Resistor, 240 ohm (LM317 reference)1
Potentiometer, 5 kohm or 10 kohm (voltage adjust)1
TO-220 heatsinks with screws2
LED and 1 kohm resistor (power indicator)1 set
DC jack and 2-pin screw terminals2
General-purpose PCB (dotted board)1

What you can build

  • Fixed 5 V rail for Arduino and logic circuits
  • Variable bench supply from about 1.25 V to 12 V
  • Battery eliminator for a radio or small gadget
  • USB-style 5 V charger board for low-current loads
  • Practice loads for testing LEDs, relays and small motors

Who it's for

  • Students building a first power supply project
  • Hobbyists who want a bench rail
  • Anyone tired of 9 V batteries on the breadboard

Notes before you start

  • Both regulators handle about 1 A with a good heatsink. Plan for 500 mA in continuous use.
  • Input voltage must stay at least 2 to 3 V above the output. With a 12 V input, a 12 V output is not reachable, so expect around 9 to 10 V at the top.
  • Regulators get hot when dropping a large voltage. Use the heatsinks and do not touch them during use.
  • If you use a mains transformer, keep the mains side fully insulated and enclosed. If unsure, use a ready-made 12 V DC adapter.
  • The 1N4007 is rated 1 A. For loads above that, ask for 1N5408 diodes instead.

Questions

Do I need to solder this kit?

Yes. You will need a soldering iron. Our Soldering Starter Kit pairs well with it.

Is the transformer included?

We can include a 0-12 V transformer or suggest a 12 V DC adapter, whichever you prefer. Tell us on WhatsApp.

Can it replace a lab bench supply?

For basic breadboard work, yes. It has no current limit, so a short circuit can damage parts. A proper bench supply is a better fit for serious work.

Why both 7805 and LM317?

The 7805 gives a steady 5 V for logic. The LM317 gives the adjustable output. Together you can compare both on one board.

Want the price for this kit?

Message us on WhatsApp. You can also ask to change parts to suit your project.

Ask price on WhatsApp

Other kits