ESP32 IoT Starter Kit
Wi-Fi and Bluetooth projects on a dual-core ESP32 board.

ESP32 IoT starter kit with ESP32 DevKit, breadboard, DHT11, relay module, OLED display, LEDs and jumper wires for Wi-Fi projects. Ask the price on WhatsApp.
Price: ask on WhatsApp
Contents can be customised. Tell us your project on WhatsApp and we'll put the right parts together.
Same-day delivery in Bhubaneswar via Rapido is available. See delivery details.
What's in the kit
| Component | Qty |
|---|---|
| ESP32 DevKit V1 (30 pin) with micro-USB cable | 1 |
| Solderless breadboard, 830 tie points | 1 |
| Jumper wires, male to male | 30 |
| Jumper wires, male to female | 10 |
| 5 V relay module, 1 channel | 1 |
| DHT11 temperature and humidity sensor | 1 |
| 0.96 inch OLED display, I2C (SSD1306) | 1 |
| PIR motion sensor (HC-SR501) | 1 |
| 5 mm LEDs, assorted | 10 |
| Resistors, 220 ohm and 10 kohm | 10 of each |
| Push buttons, 6 mm tactile | 4 |
| Buzzer, 5 V active | 1 |
What you can build
- Wi-Fi temperature and humidity monitor on a web page
- Phone-controlled relay switch for a lamp or fan
- Motion alert that sends a message through a free IoT service
- Mini weather display on the OLED
- Bluetooth LED controller from a phone
- Simple attendance or door log using Wi-Fi time
Who it's for
- Students doing IoT mini or final-year projects
- Hobbyists building home automation
- Arduino users ready to go wireless
Notes before you start
- ESP32 pins run at 3.3 V and are not 5 V tolerant. Use a level shifter or voltage divider for 5 V sensor outputs.
- The relay module is 5 V. Power it from the VIN pin while on USB and keep mains wiring away from the breadboard.
- Mains voltage is dangerous. Switch only low-voltage loads while learning, or get a qualified person to do the mains side.
- Some boards need you to hold the BOOT button while uploading. This is normal.
- The ESP32 connects to 2.4 GHz Wi-Fi only.
Questions
Can I program it with the Arduino IDE?
Yes. Add the ESP32 board package in the IDE. MicroPython also works if you prefer Python.
Is it better than an Arduino Uno?
For Wi-Fi and Bluetooth, yes. For a first ever project, the Uno kit is simpler because everything runs at 5 V.
Can I use it for a final-year project?
Yes, many IoT projects use the ESP32. Tell us your project on WhatsApp and we can adjust the sensors.
Do I need an internet connection?
For cloud dashboards, yes. A local web server on the ESP32 works on your home Wi-Fi without internet.
Want the price for this kit?
Message us on WhatsApp. You can also ask to change parts to suit your project.